EasyManua.ls Logo

Himsa Noahlink Wireless - Page 27

Himsa Noahlink Wireless
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
SYMPTOM CAUSE POSSIBLE REMEDY
Unstable/
Lost Connection
Obstacles between the Noahlink Wire-
less and the hearing instruments block
the wireless signal.
The Noahlink Wireless is placed too far
away from the hearing instruments.
A 2.4 GHz cordless telephone, a WLAN
access point or another wireless device
is powered or in use near to the fitting
station doing wireless fitting with Noah-
link Wireless.
Noahlink Wireless is sharing power
source with one or more USB harddisks,
resulting in Noahlink Wireless not having
the required power available.
Place the Noahlink Wireless in line-of-sight of the hearing in-
struments.
Move the Noahlink Wireless closer to the hearing instruments.
Minimize the number of interfering wireless sources or move
them away from the fitting area.
Use a phone that is not 2.4 GHz.
Remove the USB harddisk or use a powered USB hub to insure
the required power. Lack of power is only an issue with USB
harddisks which are very power-consuming.