Himsa NOAHlink - Charger Unit Specifications; Power Adaptor Specifications; Transport and Storage Conditions; Operating Environment Requirements

NOAHlink Users Manual
34
The following table describes how to use the Log tab:
COMMAND
USE
PROCEDURE
Browse
Change current
location of log file
 Click Browse to locate a new
file location
OR:
Type a new file location in the
Current location window
View
View entries in log
 Click View to see entries in log
Clear
Clear entries in log
 Click Clear to delete all entries
in log
Set form of entries
appearing in log
 Click the pull-down menu at
Log level and set to:
- None to record no entries
- Basic to record errors, load
operations and login/logout
procedures
- Medium to record all
Basic entries, methods
called in the driver and
some diagnostic
information
- Detailed to record all
Medium entries and all
other functions
Note: The default setting is Basic
Set amount of disk
space for log
 Click the pull-down menu at
Amount of disk space to use
and choose your preferred
number of MBs
Note: The default setting is 100KB
The range is 100KB – 5MB