HINAESS PowerGem PLUS - 2 Product Specification; Size and Weight; Performance Parameter

PowerGem Plus User Manual
7
2 Product Specification
2.1 Size and Weight
Table 2-1 PowerGem Plus Device size
2.2 Performance Parameter
Table 2-2 PowerGem Plus performance parameter
Item
Parameter value
Rated Voltage(V)
51.2
Work Voltage Range(V)
44.8~57.6
Rated Capacity(Ah)
280
Rated Energy(kWh)
14.336
Recommend Charge/Discharge Current (A)
140
Max. continuous Charge/Discharge Current (A)
140
Peak Charge Current (A)①
160 (15s)
Peak Charge Current (A)②
180 (500ms)
Peak Discharge Current (A)③
160 (300s)
Peak Discharge Current (A)④
200(500ms)
Charge Voltage (Vdc)
56.5
①②:When it is “160A≤charge current＜180A”，the BMS will start the over-charge current
protection and cut off charge after 15s,when it is “charge current ≥ 180A”,BMS will start
protection and cut off charge after 500ms.
③④: When it is “160A≤charge current＜200A”，the BMS will start the over-discharge current
protection and cut off discharge after 300s,when it is “discharge current≥200A”,BMS will start
protection and cut off discharge after 500ms.
Product
Nominal
Voltage
Nominal
Capacity
Max.Dimension
Weight
PowerGem Plus
DC51.2V
280Ah
900×475×237.5mm
≈113kg