What does "SEN 3 FAIL" mean on my Hinowa Lifting System display?
If the display of your Hinowa Lifting System shows "SEN 3 FAIL", charge or replace the lead battery. Also, verify the connector/wires of the third boom cylinder sensor.
What does "PREOPERATING" mean on the display of my Hinowa Lifting System?
If the display of your Hinowa Lifting System shows "PREOPERATING", check the green connector on the master board and the CAN BUS line between the remote control and the master board. Try connecting the remote control at the ground with the optional cable, operating accordingly. If it does not start the DOWNLOAD, try another remote control or reboot the master board software.
What does "HELP ERROR" mean on the display of my Hinowa Lifting System?
If the display of your Hinowa Lifting System shows "HELP ERROR", check if it depends on one photocell that temporarily loses its signal. This can be done by looking at the photocells' red and green lights.
What does "DOWNLOAD" mean on the display of my Hinowa Lifting System?
If the display of your Hinowa Lifting System shows "DOWNLOAD", check if the DOWNLOAD numbers are streaming and then wait a few minutes.
General| Max Working Height | 15.70 m |
|---|---|
| Working Load Capacity | 230 kg |
| Power Source | Diesel |
| Safe Working Load | 230 kg |
| Rotation | 360° |
| Platform Width | 0.70 m |
| Max. Gradient | 25% |
| Axles | 2 |
| Weight | 2, 150 kg |
Identifies major components of the aerial platform's base and aerial parts.
Explains how to find the machine's unique serial number on its frame.
Lists detailed technical specifications for the LightLift 15.70 machine.
Provides dimensional drawings and measurements of the machine.
Illustrates the machine's operational working area and capacity limits.
Details the procedure for starting the machine, including battery and stop buttons.
Explains the function and operation of the machine's emergency stop buttons.
Describes the display and general functions of the remote control unit.
Explains how to operate the machine's tracks for movement.
Details how to widen or narrow the machine's tracks for stability or passage.
Describes how to select different speed modes for track movement.
Explains the automatic system for reducing tracks speed based on stability risks.
Covers the procedures for operating and settling the machine's outriggers.
Details the process of automatically stabilizing the machine using outriggers.
Explains how to automatically retract the machine's outriggers.
Describes how to move individual outriggers for precise placement.
Explains the system preventing boom contact with the engine carter/lithium pack.
Locates the emergency devices and control components on the machine.
Details emergency procedures for aerial part operations, including descent.
Explains the gravity-assisted emergency descent procedure for the aerial platform.
Describes how to operate the machine from the ground control station in emergencies.
Details the emergency descent procedure with safety systems bypassed.
Explains emergency descent using the manual hand pump from the ground.
Describes ground movement procedures with safety bypass for tracks.
Details emergency outrigger movement using the hand pump.
Provides the procedure for emergency starting the machine's engine.
Identifies and locates the main hydraulic components within the machine.
Presents the overall hydraulic system diagram for the machine.
Shows the hydraulic diagram specific to the pumps and undercarriage.
Displays the hydraulic diagram for the aerial part of the machine.
Explains the system of pumps and hydraulic lines in the machine.
Details the hydraulic system for the ground part of the machine.
Describes the hydraulic control of the outrigger cylinders.
Explains the hydraulic control of the drive gear motors for tracks.
Details the hydraulic system for tracks widening and narrowing.
Details the hydraulic system for the aerial part of the machine.
Explains the hydraulic control for the first and second booms.
Describes the hydraulic operation of the third boom.
Explains the hydraulic control of the telescope boom.
Details the hydraulic operation of the jib.
Explains the hydraulic system for maintaining basket level.
Describes the hydraulic control of the basket rotation.
Explains the hydraulic system for turret rotation.
Details the hydraulic system for emergency gravity descent of booms.
Introduces and locates the main electronic control boards of the machine.
Discusses the machine's software and its update process.
Explains the CAN Bus communication system used in the machine.
Describes sensors that communicate via the CAN Bus system.
Lists sensors and devices that do not communicate via CAN Bus.
Explains the inclination sensing system and its calibration.
Details the load cell system for measuring weight and its calibration.
Describes the operation of the electric motor for non-lithium versions.
Covers the machine's 12-volt battery system.
Explains the battery charging system for the machine.
Details diagnosis and settings accessible via the remote control.
Explains the meaning of various icons displayed on the remote control screen.
Describes the INPUT menu for checking device status and signals.
Lists and explains potential errors displayed on the machine's system.
Shows how to display and check the machine's working hours.
Describes how to verify the proper functioning of the joysticks.
Provides access to various machine settings and sub-menus.
Settings related to machine rotation.
Displays and allows setting of machine model and power supply versions.
Allows setting of the machine's time and time zone.
Manages passwords for accessing certain settings.
Allows adjustment of the machine's date.
Explains the calibration procedure for the load sensor.
Details the calibration procedure for the inclination sensor.
Provides access to additional settings and menus.
Provides modem status information for RAHM connection.
Displays GPS references like position, latitude, and longitude.
Accesses the first page of optional settings.
Allows setting of the optional warning buzzer and motion alarm.
Enables or disables the second speed (Hare) function for tracks.
Configures electric motor power settings.
Allows setting of outrigger lights status.
Internal Hinowa menu.
Accesses the second page of optional settings.
Allows setting and resetting of the service reminder interval.
Configures the RC SPEED function to avoid tracks max speed.
Configures the RC MOVE function to bind operator position to track movement.
Internal Hinowa menu.
Internal Hinowa menu.
Configures the Skyguard function to stop movements.
Accesses the third page of optional settings.
Sets the maximum charging current for lithium machines.
Sets the RPM configuration for a new inverter.
Explains how to connect the remote control to the ground cable.
Details the components responsible for engine RPM regulation.
Provides technical details for the gasoline engine model.
Presents technical specifications for the diesel engine model.
Describes the lithium battery system and charge information.
Lists RPM settings for various movements and speed selections.
Explains temperature management of lithium battery cells.
Covers self-diagnosis capabilities and fault codes for the lithium system.
To Next Page
