Procedure
1
Procedure
Operation and Screen Types
(p.12)
Describes the screen types and an overview of the
operating keys.
Measurement Procedure
(p.16)
Describes procedures from measurement prepara-
tion to analysis.
Monitoring Voltage Fluctua-
tions (p.19)
This section describes voltage measurement using
an AC transducer* to acquire voltage fluctuation data
for one week, with the data automatically saved on a
CF card.
* The example transducer provides 0 - 10 V DC out-
put proportional to 0 - 150 Vrms AC input.
Monitoring Temperature
Changes (p.21)
This section describes temperature measurement
using a type K thermocouple to acquire temperature
data once per second, for monitoring temperature
changes. The post-measurement saving method is
also described.
Monitoring Energy Con-
sumption (p.24)
This section describes pulse measurement using a
watt-hour meter* to acquire integrated power con-
sumption data for one month.
* The example watt-hour meter provides an output of
50,
000 pulses/kWh.
Analysis (p.26)
View and calculate waveform measurement values
using the A/B cursors.
To Next Page
Loading...
