Monitoring Temperature Changes
21
This section describes temperature measurement using a type K thermocouple to
acquire temperature data once per second, for monitoring temperature changes.
The procedure for saving measurement data to a CF card after measuring is also
described.
Monitoring Temperature Changes
1 Prepare the Following Before Measuring
Insert a CF card
Connect to CH1
Connect to
power outlet
1
2
5
4
Turn the power on
(Right side)
3
Items to prepare
Model LR8431-20 Memory
HiLogger
AC Adapter (supplied)
ThermoCouples (K)
CF Card (Hioki option)
"Measurement Procedure" (p. 16)
Connect to the
measurement points
2 Configure Measurement Settings
Make recording timing settings on the Setting screen.
1
2
The default settings for the non-
framed items can be left as-is.
Change as needed.
Setting Example
(to record at one-second intervals from starting measure-
ment until pressing the START/STOP key again)
Interval: 1s
Record time: Cont On
Set the recording
interval.
Set the recording
length.
Select
Apply
To Next Page
Loading...
