Need help?Do you have a question about the HireTech HT7-2 and is the answer not in the manual?
Ensures operator protection from electric shock by proper grounding of the machine.
Mitigates explosion risk from dust by requiring ventilation and avoiding ignition sources.
Prevents injury by mandating unplugging before servicing or adjustments.
Mandates use of residual current breakers and verification of correct voltage supply.
Encompasses safe practices for operation, handling, and machine maintenance.
Instructions for safe carrying, securing, and transporting the floor sander.
Step-by-step process for correctly fitting an abrasive disc to the machine.
Steps to prepare the floor, including removing obstacles and cleaning.
Details on initiating operation and moving the sander across the floor.
Procedures for handling and replacing the dust bag during and after sanding.
How to operate Drum, Disc (Edger), and Orbital sanders effectively.
Techniques for sanding hard-to-reach areas and blending with machine work.
Sanding methods for plank, strip, parquet, block, veneered, and laminated floors.
Covers general checks, visual inspection, dust control, drive, lubrication, and motor care.
Details the reasons for and the process of removing and replacing the sanding pad.
Visual guides showing correct and trimmed sanding pad contact patterns.
Lists specific tools needed for maintenance and repair tasks.
Identifies consumable parts such as grease and dust bags.
To Next Page
General
