FLOOR SANDER ABRASIVE GUIDE
6
DO NOT OVER SAND USE ONLY AS HEAVY GRADE ABRASIVE AS IT TAKES TO DO THE-
JOB PROGRESS FROM FIRST GRADE USED THROUGH FOLLOWING GRADES TO.
REMOVE ALL VISIBLE SANDING MARKS DO NOT MISS GRADE.A.
FLOOR SANDER ABRASIVES
Abrasive Grade Floor Type and Condition
Grit P24 Open Coat
(Very Coarse non-glogging)
For removing surface coatings from old floors such as varnish, stains and wax
polishes. For the rapid sanding and removal of scratches and marks. Sanding
level the joints of sub-flooring like particle board and masonite.
Grit P24
(Very Coarse)
For the rapid sanding and removal of scratches and marks. Sanding level the
joints of sub-flooring like particle board and masonite.
Grit P36 to P50
(Coarse/Medium)
For removing surface coatings from old floors such as varnish, stains and wax
polishes. For the rapid sanding and removal of scratches and light marks.
Sanding level the joints of sub-flooring like particle board and masonite.
Grit P60 to P80
(Medium)
For the rapid sanding and removal of scratches and light marks. Sanding level
the joints of sub-flooring like particle board and masonite.
Grit P100 to P120
(Medium/Fine)
Intermediate sanding of all types of wood floor. For final sanding of all types of
wood floor.
Grit P150 - P180
(Fine/Very Fine)
For final sanding of all types of wood floor. First sanding of cork or composition
floors. For sanding between coats of solvent based and 2 pack varnishes.
Hire tec h Abrasiv es
Hiretech recom m e nd the
following abrasive range
which are suita ble for all floo r
types and applications.
P16 - - 01025 - - -
P24 Grit Open Coat 01001 - - 01044 - -
P24 Grit 01002 01010 01026 - - -
P36 Grit - 01011 ----
P40 Grit 01003 01012 - 01045 01750 -
P50 Grit - 01013 01027 - - -
P60 Grit - 01014 - - 01751 -
P80 Grit 01004 01015 01028 01046 01752 -
P100 Grit - 01016 ----
P120 Grit 01005 01017 01030 01048 01754 -
P150 Grit - 01018 ----
P180Grit ----01756 -
P280Grit/BackingPad -----01769
HTF FLOOR
SANDER SHEET
ADHESIVE
BACKED
25 & 50/CASE
HTF ABASRIVE
PAD
20/CAS E
HT8/DU8
FLOOR SANDER
SHEET
20 & 50/CASE
HT8 EX
FLOOR SANDER
BELTS
5/CASE
HT7/SUPER 7
EDGER DISC
FIBRE BACKED
25/CAS E
HT7/SUPER 7
EDGER DISC
PAPER BACKED
25 & 50/CASE
To Next Page
Loading...
