HireTech HTF-2 User Manual

FLOOR SANDER MODEL HTF-2
OWNERS MANUAL & OPERATING INSTRUCTIONS
REF.180 PART # 031390
PRINTED IN THE UK
JULY 2003
© Hiretech
ABC
From Serial Number
00579 (220/240 Volt) & 00579 (110/120 Volt)

HireTech HTF-2 Specifications

General

Brand	HireTech
Model	HTF-2
Category	Sander
Language	English

Summary

HIRETECH FLOOR SANDER HTF-2

Introduction and Overview

Introduces the HTF-2 Floor Sander and its owner's manual.

NORTH AMERICAN SAFETY INSTRUCTIONS

Grounding and Explosion Hazards

Safety regarding grounding, electrical shock, and dust explosion risks.

Moving Parts and Injury Prevention

Safety advice concerning moving parts and general injury prevention.

USE AND APPLICATION

PRODUCT SPECIFICATIONS

SETUP AND OPERATION GUIDANCE

Assembly, Installation, and Preparation

DETAILED SPECIFICATIONS

CORE SAFETY PROCEDURES

Electrical and Power Safety

Safety regarding electricity, grounding, cables, and switches.

Operational and Environmental Safety

Guidelines for safe operation, dust control, ventilation, and environmental hazards.

ASSEMBLY & TRANSPORT

INSTALLING ABRASIVE

PREPARATION AND OPERATION

Sander Operation and Safety

FLOOR SANDING TECHNIQUE

FLOOR SANDING TECHNIQUES CONTINUED

HTF-2 FLOOR SANDER ABRASIVE GUIDE

SERVICE & ROUTINE MAINTENANCE

General Checks and Visual Inspection

Dust Control and Drive System Maintenance

Motor Brush Replacement Procedure

Step-by-step guide for safely replacing motor brushes.

SERVICE & ROUTINE MAINTENANCE CONTINUED

Wheel Adjustment and Electrical Testing

FAULT FINDING

Troubleshooting Common Issues

FLOOR SANDER ABRASIVES GUIDE

SERVICE & REPAIR CONTACTS

HIRETECH LIMITED WARRANTY