DECLARATION OF CONFORMITY
This declaration identifies the product, manufacturer's name and address, and applicable specifications
recognised in the European community.
15
DECLARATION OF CONFORMITY
Manufacturer's Name:
Manufacturer's Address:
declares that the product:
Product Name:
Model Name: HTF-2
HTF-2
conforms to the following:
following the provisions of the directives:
electrical safety test procedures comply with:
Hire Technicians Group Ltd.
Chalk Hill House
8 Chalk Hill
Watford
Herts WD1 4BH
Hiretech Floor Sander
230 Volt 50Hz Insulation Class 1
110 Volt 50Hz Insulation Class 1
Machinery Directive (Harmonised) 89/392-EU as amended
Low Voltage Directive (Harmonised) 73/23/EU as amended
Electromagnetic Compatibility Directive 89/336/EU as amended
89/392/EU, 93/44EU, 73/23/EU, 93/68/EU, 89/336/EU, 91/368/EU,
92/31/EU
EN60 335-1-88 (HD 251-1-3) BS 3456-201 EN292-1-91
EN292-2-91 EN60204-1-92
EN55014-93 (BS 800) EN 50082-1-92
IEC 745-2-4 (HD 400.2) (BS 2769-2-2.4)
IEC 335 pt. 1-2, HD251 1-3 1982, BS 2769 & 3456, CSA C22.2,
KEMA K78A1/W1 & W3, NEMKO 503./89, DIN VDE 0700 1/04.88
HD 264.S2 15/07.86
Where the product is licensed to carry a National Approval Mark it is
certified that all such products comply with the terms of that license.
C.J. Hedger, Director of Engineering. 1 July 2003
To Next Page
Loading...
