EasyManuals Logo

Hirschmann BAT54-F User Manual

Hirschmann BAT54-F
548 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #472 background imageLoading...
Page #472 background image
More services
472
12.2
Vendor Class and User Class Identifier on
BAT54-Rail/F..
Release
7.54
06/08
12.2Vendor Class and User Class
Identifier on the DHCP Client
The DHCP client in BAT can insert additional information in the DHCP re-
quest sent, which simplify request recognition within the network.
D The vendor class identifier (DHCP option 60) shows the device type. The
vendor class ID is always transmitted.
D The user class identifier (DHCP option 77) displays a user-defined string,
which can be entered under
Setup/DHCP
or in LANconfig in the configura-
tion area under 'TCP/IP' on the 'DHCP' tab in the 'User Class ID' field (de-
fault: empty). The user class ID is only transmitted when the user has
configured a value.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hirschmann BAT54-F and is the answer not in the manual?

Hirschmann BAT54-F Specifications

General IconGeneral
ModelBAT54-F
TypeWireless Access Point
Frequency Bands2.4 GHz, 5 GHz
Wireless StandardsIEEE 802.11a/b/g/n
Maximum Data Rate300 Mbps
Ethernet Ports2 x 10/100/1000 Mbps
Power over Ethernet (PoE)IEEE 802.3af
Operating Temperature-20°C to +60°C
Data Rate300 Mbps
Antenna Connectors2 x RP-SMA
HousingPlastic
Protection ClassIP30
Mounting OptionsWall
Power SupplyPoE

Related product manuals