Rapid Spanning Tree
72
4.6
The Rapid Spanning Tree Protocol
Redundancy L2E
Release
4.1
03/08
You now connect the redundant lines. You can avoid loops and network
failures during the configuration phase by first configuring the Switches
and only then connecting the redundant lines.
Designated
Costs
Display of the costs of the path from
this port to the root Switch.
Costs
(see table 11)
-
Designated Port Display of the port identifier of the
port that creates the connection to
the root Switch for this port (on the
designated Switch).
Port identifier
(hexadecimal) and
port number
-
Variable Meaning Possible values State on deliv-
ery
Table 14: Port-related RSTP settings and displays
To Next Page
Loading...
