HIS H6000 - Operating the H6000

HIS Business Manufacturing Company
Tel: (619) 447-0009 (800) 292-9831 Fax: (619) 447-4695
Web Site: www.hizbiz.com Email: sales@hizbiz.com
8
Operang the H6000
5. Wrap rope clockwise around
capstan several mes. Each
successive wrap reduces tailing
tension.
6. Set motor switch to low speed
(follow instrucons on name
plate). Turn toggle switch on. Use
footswitch to operate motor.
7. Apply fricon during pull. Stand
to side outside 45 degree safety
angle. Discard rope as it feeds.
8. Aer pull is complete unwrap
rope from capstan. Disengage
upper arm from yoke. Lock upper
arm in storage posion.
*CAUTION: MAKE SURE ROPE IS NOT UNDER-LOAD BEFORE REMOVING