To Next PageTo Next Page
Need help?Do you have a question about the Hisense AVC-09HJFA and is the answer not in the manual?
Steps for lifting and securing the indoor unit using suspension bolts, nuts, and washers.
Details on connecting refrigerant pipes, required torque, and insulating the pipes after connection.
Instructions for drain pipe connection, ensuring correct position and a down-slope pitch.
Safety warnings and pre-wiring checks, including power disconnection and wire security.
Procedure for connecting transmission wiring, power wiring, and earth wires to the electrical box terminals.
Steps for conducting the test run, including electrical resistance checks and valve operation.
Instructions for setting DIP switches for indoor unit addressing and refrigeration system cycle configuration.
Steps for lifting and securing the indoor unit using suspension bolts, nuts, and washers.
Details on connecting refrigerant pipes, required torque, and insulating the pipes after connection.
Instructions for drain pipe connection, ensuring correct position and a down-slope pitch.
Safety warnings and pre-wiring checks, including power disconnection and wire security.
Procedure for connecting transmission wiring, power wiring, and earth wires to the electrical box terminals.
Steps for conducting the test run, including electrical resistance checks and valve operation.
Instructions for setting DIP switches for indoor unit addressing and refrigeration system cycle configuration.
General| Cooling Capacity | 9000 BTU/h |
|---|---|
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Outdoor Unit Noise Level | 50 dB(A) |
| Indoor Unit Weight | 8.5 kg |
| Operating Temperature (Heating) | -7-24°C |
| Type | Split Type |
| Power Supply | 220-240V/50Hz |
