To Next PageTo Next Page
Need help?Do you have a question about the Hisense AVT52UR4RA4 and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Fan Speeds | 3 |
| Filter Type | Washable |
| Operating Modes | Cool, Dry, Fan, Auto |
| Thermostat | Yes |
Explains the meaning of DANGER, WARNING, CAUTION, and NOTE symbols.
Highlights installation by qualified personnel and voltage check before starting.
Warns against product modification and risks like electric shock or fire.
Covers cord damage, grounding, wiring by electricians, and circuit capacity.
Advises against flammable gas near the unit and actions for abnormal operation.
Covers power switch usage, avoiding foreign objects, and temperature settings.
Specifies temperature and humidity requirements for product storage.
Outlines specific safety measures for handling R32 refrigerant.
Advises adherence to transport regulations for flammable gas equipment.
Emphasizes proper safety signage and employee training.
States compliance with national regulations for disposal.
Directs storage adherence to manufacturer's instructions.
Specifies package protection and storage quantity limits.
Details safety checks and procedures for servicing operations.
Pre-work safety checks for areas with flammable refrigerants.
Controlled procedure to minimize flammable gas or vapor presence.
Instructing staff and sectioning off the workspace.
Using detectors and ensuring suitability for flammable refrigerants.
Availability of fire extinguishers for hot work.
Prohibiting ignition sources near refrigerant systems.
Ensuring adequate ventilation before and during work.
Checking electrical components and following guidelines.
Prohibits ignition sources for refrigerant leak detection.
Acceptable methods for detecting leaks in flammable refrigerant systems.
Procedures for removing and evacuating refrigerant from the system.
Requirements for charging systems with refrigerant.
Recommends familiarization and safe refrigerant recovery.
Specifies room area, pipe-work, moving, and placement guidelines.
Details appliance installation, operation, and storage safety.
Explains symbols related to flammable refrigerants and manual references.
Identifies parts of the indoor unit like air intake, filter, and display panel.
Explains the function of indicators like Defrost, Filter clean, Run, and Timer.
Describes the function and operation of the emergency switch.
Introduces wired and wireless remote controllers for operation.
Details specific operational behaviors like compressor protection and mode interference.
Provides initial steps for common issues like drain overflow or smoke.
Lists checks for poor cooling or heating performance.
Explains normal sounds, smells, and dew formation during operation.
Step-by-step guide for air filter removal and installation.
Critical safety warnings for installation personnel.
Lists necessary tools for performing the installation.
General guidance for installing the indoor unit.
Pre-installation checks and preparations for the indoor unit.
Details installation accessories, their quantity, and purpose.
Guidelines for selecting the optimal installation site for the unit.
General instructions for the indoor unit installation process.
Details on installing suspension bolts for mounting the unit.
Specifies bolt positions and pipe routing dimensions.
Steps to prepare the indoor unit before mounting, including grille removal.
Instructions for ceiling and floor standing installation methods.
Steps for installing the unit in a floor standing configuration.
How to adjust the unit horizontally for proper drain flow.
Instructions for handling and connecting refrigerant pipes.
Requirements for copper pipe material and preparation.
Details on connecting refrigerant pipes and torque specifications.
Guidelines for installing the drain piping to prevent clogs and leaks.
Instructions for electrical wiring, including precautions and diagrams.
Detailed steps for electrical installation, including ELB and wire selection.
Guidance for performing the trial run after installation is complete.
Information on responsible disposal and recycling of the product.
