Hisense D16CW User Manual

1
7.STORAGE AND DISPOSAL
7.1 STORAGE
Long-term storage - If you do not plan to use the unit for an extended period
of time (more than a few weeks), it is best to clean the unit and dry it
completely.
Store the unit as per the following steps.
1. Unplug the unit.
2. Empty the water tank and dry with a cloth.
3. Clean the filter and let the filter dry completely in a shaded area.
4. Collect the power cord at the tank and re-install it.
5. Re-install the filter in its position.
6. Store the appliance in a well-ventilated, dry, safe place indoors, with
no corrosive gas present.
7. The unit must be kept in an upright position when in storage.
ATTENTION: The evaporator inside the machine has to be dried out
before the unit is packed away to avoid component damage and mould.
Unplug the unit and place it in a dry, open area for a few days to dry it
completely. Another way to dry the unit is to set the humidity point more
than 5% higher than the ambient humidity to force the fan to dry the
evaporator for a couple of hours.
7.2 DISPOSAL
Cautions: Switch off the unit and unplug it immediately if anything
abnormal occurs. Then contact a qualified electrician.
Do not dispose of electrical appliances in unsorted municipal waste;
use separate collection facilities.
Contact your local government for information regarding the
collection systems available.

Hisense D16CW Specifications

General

Wi-Fi	Yes
Noise level	40 dB
Product color	White
Water tank capacity	2 L
Refrigerating medium	R290
Timer duration (maximum)	24 h
Suitable for room area up to	35 m²
Suitable for room volume up to	- m³
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	30 - 80 %
AC input voltage	220 - 240 V
Power consumption (typical)	270 W
Package depth	264 mm
Package width	344 mm
Package height	555 mm
Package weight	Weight of the packaged product in gram.

Weight and Dimensions

Depth	200 mm
Width	280 mm
Height	500 mm
Weight	12000 g