EasyManuals Logo

Hisense DCGE802 User Manual

Hisense DCGE802
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38
838500
INTERRUPTIONS AND CHANGING
THE PROGRAMME
INTERRUPTIONS
Interrupting the programme process
Press the (3) START/PAUSE button to pause/resume a programme.
To stop and cancel the drying programme, press the (3) START/PAUSE button and hold it for 3
seconds. The selected programme will stop, and the dryer will start to cool down. Cooling down
time depends on the selected programme. After this process, the drying programme can be
selected again.
Open door
If the dryer door is opened during the drying process, the drying cycle will be interrupted.
When the door is closed and the (3) START/PAUSE button is pressed, the drying will resume from
the point at which it was interrupted.
The dryer door will heat up during the drying process. Make sure you do not burn yourself
when opening the dryer door.
Full condensate tank
When the condensate tank is full, the drying programme will pause (symbol (9) will be lit up).
Empty the condensate tank (see chapter »CLEANING AND MAINTENANCE/Emptying the condensate
tank«).
Press the (3) START/PAUSE button to resume the drying programme from the point at which it was
interrupted.
Power supply failure
When power supply is resumed, the signal light on the (3) START/PAUSE button will flash.
To resume the drying process, press the (3) START/PAUSE button.
CHANGING THE PROGRAM/FUNCTIONS
Switch off the dryer by pressing the button (1) ON/OFF; then, switch it on again by pressing the
button (1) ON/OFF and rotate the (2) programme selector knob to the desired programme, or
choose extra functions.
Select another program/function and press the (3) START/PAUSE button again.
838500en.indd 38838500en.indd 38 16. 03. 2021 12:35:2116. 03. 2021 12:35:21

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense DCGE802 and is the answer not in the manual?

Hisense DCGE802 Specifications

General IconGeneral
Drum volume8 L
Control typeRotary, Touch
Loading typeFront-load
Drying systemCondensation
Product colorWhite
Built-in displayYes
Reversible doorsNo
Appliance placementFreestanding
Cycle time150 min
Noise level65 dB
Drying classB
Drum capacity8 kg
Heat sourceElectric
Energy consumption4.75 kWh
Annual energy consumption560.5 kWh
Package depth690 mm
Package width640 mm
Package height910 mm
Package weight42100 g
Weight and Dimensions IconWeight and Dimensions
Depth625 mm
Width600 mm
Height850 mm
Weight39600 g

Related product manuals