2. Unscrew and lift the lid from the rear and remove it, then lift the upper door and
place it on a padded surface to prevent it scratched.
3. Remove the upper hinge core, transfer it to left side and tighten securely, then put it
in a safe place.
4. Remove the two flange screw, then remove the middle hinge that hold the lower door
in place. Lift the lower door and place it on a padded surface to prevent scratching it.
5. Remove the hinge hole cover from the right holes as illustrated and transfer them to
the uncover hole at the left side.
12
To Next Page
Loading...
