To Next Page

To Previous Page

Installing Your N

Positioning:

Position the appliance

away from sou

of stoves, radiators,

direct sunlight etc.

Maximum performance and safety are

guaranteed by maintaining the correct

indoor temperature for the class of unit

concerned as specified on the rating plate.

This appliance performs well

ST. The appliance

may not work properly

if left at a temperature above or below the

indicated range.

Climate class

Ambient temperature

+10°C to +32°C

+16°C to +32°C

+16°C to +38°C

+16°C to +43°C

Appliance

must not be exposed

Sufficient air must be allowed to circulate

in the lower rear section of

poor air circulation can affect performance

Built-in appliance

should be positioned

away from heat sources such as stoves,

fires or heaters.

Installation instructions:

Before

installing, carefully read the

instruction in order to avoid a certain

number of problems.

This is

Dimensions of mounting slot

ew Appliance

away from sou

rces

direct sunlight etc.

Maximum performance and safety are

guaranteed by maintaining the correct

indoor temperature for the class of unit

concerned as specified on the rating plate.

This appliance performs well

from SN to

may not work properly

if left at a temperature above or below the

Ambient temperature

+10°C to +32°C

+16°C to +32°C

+16°C to +38°C

+16°C to +43°C

must not be exposed

to rain.

Sufficient air must be allowed to circulate

in the lower rear section of

appliance, as

poor air circulation can affect performance

should be positioned

away from heat sources such as stoves,

Installation instructions:

installing, carefully read the

instruction in order to avoid a certain

Dimensions of mounting slot

Follow the steps

in the

guide provided.

Note:

Your product is designed and built

for domestic household use only. The

product must

be correctly installed,

located and operated in accordance with

the instructions contained in

Instructions guide

provided.

Reversing the fridge

door

The side at which the door opens can be

changed, from the right side (as supplied) to

the left side, if the installation site requires.

Warning! When reversing the door,

appliance must not be connected to the

mains. Ensure

that the plug is removed

the mains socket..

Tools you will need(Not provided):

Philips Screwdriver &

Slotted Screwdriver

Wrench(

Note:

When required, tilt the refrigerator back

order to gain access to the base, you

should rest the

appliance

packaging or similar material to avoid

damaging the backboard of the

refrigerator. To reverse the door, the

following steps are generally

recommended.

1. Stand the refrigerator upright. Open the

door,

remove the upper hinge cover

and right).

Remove the lower screw hole

cover for the cabinet.

Remove the screw

hole cover for the door.