18
4. Loose screws ③， remove part ①
and part ②，then replace them to the left
side and tighten securely with screws ③.
① Door stopper
② Limit block
③ Self-tapping screw
5. Lay the freezer on soft foam packaging
or similar material. Remove part ① part
② , and part ③ by unscrewing the
screws ④.
① Screw cover
② Adjustable bottom feet part
③ Right lower hinge part
④ Special flange self-tapping
screw
6. Replace part ③ to the left side and
fixing it with the screws ④ . Replace
part ① and part ② to another side and
fixing it.
To Next Page
Loading...
Need help?
General
