44
784518
CLEANING OF THE HEAT EXCHANGER
Do not touch the inner metal parts of the heat exchanger with bare hands. Danger of injury on
sharp parts. Use appropriate protection gloves when cleaning the heat exchanger.
Incorrect cleaning of the metal fins of the heat exchanger can permanently damage the
tumble dryer. Do not press on the metal fins with hard objects like for example the plastic tube of
a vacuum cleaner.
The dust and dirt in the metal fins of the heat exchanger can be cleaned with a vacuum cleaner and
a soft brush attachment.
Access to the heat exchanger is possible, when the heat pump filter is removed as is described in
the chapter »Cleaning the heat pump filter«.
Without pressing, gently move the brush attachment only in the direction of the metal fins from top
to bottom. Too much pressure can damage or bend the metal fins of the heat exchanger.
We recommend you clean the heat exchanger at least every twelve months.
To Next Page
Loading...
