Connecting a PC with VGA Cable
1.
output jacks to TV’s PC AUDIO jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio
PC
VGA Cable
(not included)
Audio Cable
(not included)
Primarily this unit is intended for use as an LCD TV. If you want to use it as a monitor, please contact the
manufacturer of the PC Video/Graphic's card for further support. Perfect compatibility is not warranted.
Connecting an Audio Receiver with Optical Cable
1.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
Use a optical cable to connect the A/V device’s OPTICAL jack to the TV’s OPTICAL jack.
Connecting the Aerial
Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the ANT socket on the
TV.
Do not connect the TV to the mains supply until you have completed all the connections.
Ω
OR
RF coaxial cable
(not included)
Optical Cable
(not included)
14
Getting Started
TV JACK
EXTERNAL DEVICES
TV JACK
EXTERNAL DEVICES
NOTE
TV JACK
NOTE
To Next Page
Loading...
Need help?
General