OptionsSettings
Adjusting the water softener. Select a
setting depending on the hardness of
the water supply. It is important that
this setting is correct!
2:00 - 2:09Water hardness2.
Recom-
mended
setting
French wa-
ter hard-
ness scale
German
water
hardness
scale
2:000-9°fH0-5°dH
2:0110-14°fH6-8°dH
2:0215-20°fH9-11°dH
2:0321-25°fH12-14°dH
2:0426-34°fH15-19°dH
2:0535-43°fH22-24°dH
2:0644-52°fH25-29°dH
2:0753-70°fH30-39°dH
2:0871-88°fH40-49°dH
2:0989°fH50°dH
Do not forget to put salt in the salt
compartment after you have set the
water softener to 2:01 - 2:09.
For a water supply with a hardness
under 6°dH (9°fH), select 2:00. The
water softener is deactivated and no
salt is needed.
Pre-selected at factory: 04
14
To Next Page
Loading...
