AlternativesSettings
See Water hardness in the chapter Before washing for
the first time.
For a water supply with a hardness below 6°dH (10°fH /
7°eH / 1.0 mmol/l), select 00. The water softener is deac-
tivated and no salt needs to be added.
Pre-selected at factory: 04
Activate this setting when using an all-in-one detergent
that contains rinse aid.
00 (Off)
01 (On)
TAB5
This setting reduces the rinse aid dosage and affects how
often the dishwasher's built-in softener is regenerated.
Pre-selected at factory: 00
The dishwasher door opens automatically, which shortens
the program time and improves the drying results. Wait
until the dishwasher indicates that the program has ended
and the dishes have cooled before unloading the dish-
washer. (If the dishwasher is built-in the surrounding fur-
nishings must be resistant to any condensation from the
dishwasher.)
00 (Off)
01 (On)
Auto Dry6
Not available for: Hygiene 70°, Self-clean
Any error messages.Error readoutF--
When contacting the service department, you may be
asked to provide the most recent error messages.
Restores all settings to the factory defaults.Restore factory defaultsrSt
Select rSt and press .
To exit the dishwasher's settings menu, select End and
press .
ExitEnd
19
To Next Page
Loading...
