Hisense HS693C60XAD User Manual

Care and cleaning
Top up with rinse aid
When the rinse aid needs topping up, the above symbol lights on the display.
Lift up to open
Press to close
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked MAX.
3. Wipe up any splashes of rinse aid around the compartment.
4. Close the lid firmly.
After topping up, it may take a while before the symbol goes out.
Top up with salt
When the salt needs topping up, the above symbol lights on the display.
1. Remove the salt compartment lid by turning it anticlockwise.
2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. (Water is only
needed the first time.)
3. Add enough salt to fill the salt compartment (max. 750 gram). Use special dishwasher salt.
4. Wipe up any excess salt so that the lid can be screwed on firmly.
After topping up, it may take a while before the symbol goes out.
WARNING!
In order to avoid rust stains a dishwashing program must be started immediately after adding
salt.
Never pour dishwasher detergent into the salt compartment. This destroys the water softener!
25

Hisense HS693C60XAD Specifications

General

Type	Freestanding
Capacity	16 place settings
Energy Rating	A++
Noise Level	42 dB
Delay start	Yes, up to 24 hours
Child lock	Yes
Wash Programs	Auto, Eco, Intensive, Quick, Rinse
Width	600 mm
Height	845 mm
Depth	60 cm
Water consumption	9.5 L
Drying System	Condensation drying