What to do if water remains in Hisense dishwasher?
If water remains in your Hisense dishwasher, there are several potential causes. Start by cleaning the filter and ensuring it's correctly fitted. Check for debris in the drainage pump and make sure the yellow drainage pump stop is in place. Inspect the drainage hose for any kinks or blockages, ensuring it has an inner diameter of at least 14 mm where it connects to the sink unit's water trap.
Why are dishes not dry enough in my Hisense HV642C60?
If your Hisense dishwasher isn't drying dishes adequately, first ensure that the Auto Dry setting is activated. Try fully loading the dishwasher, as an incomplete load can affect drying performance. Check the rinse aid level and increase the dosage if needed. If you're using all-in-one detergents with the TAB setting activated, consider switching to separate detergents or deactivating the TAB setting and adding salt and rinse aid separately.
Why does my Hisense HV642C60 not start?
If your Hisense dishwasher doesn't start, first press the start button and check if the display starts counting down. Make sure the door is properly closed and that the door lock has clicked into place. If the door lock hasn't engaged, open the door, press and hold the appropriate button until the display counts down, wait for 60 seconds, and then close the door again. Verify that the Delayed start option isn't selected by pressing and holding the relevant button for three seconds. Finally, ensure the dishwasher is plugged into the wall socket and that no fuses or circuit breakers have been tripped.
Why are my dishes not clean in my Hisense dishwasher?
If the dishes in your Hisense dishwasher aren't clean, several factors could be at play. Make sure the dishes aren't blocking the spray arms, and clean the spray arms if the holes or bearings are blocked. Choose a program with a higher temperature, like Intensive 70°, for dissolving grease on heavily soiled dishes. Ensure you're using the correct detergent dosage based on your water hardness, as too much or too little detergent can affect results. Finally, check the age of your detergent, as old detergent may not be as effective.
How to fix Hisense HV642C60 door that won't close?
If your Hisense dishwasher door won't close, make sure the baskets are correctly positioned horizontally and that no dishes are blocking the baskets from sliding into place.
Why are there spots on stainless steel in my Hisense HV642C60?
If you notice spots on stainless steel or silver items after washing in your Hisense dishwasher, it could be due to a few reasons. Foodstuffs like mustard, mayonnaise, lemon, vinegar, salt, and dressings can cause spots if left on items for too long, so rinse these off before washing. Separate dishes made from different metals like silver, stainless steel, and aluminum to avoid contact during washing. Check and adjust the rinse aid dosage setting as needed. If using all-in-one detergent with the TAB setting activated, try switching to separate detergents or deactivating the TAB setting and adding salt and rinse aid separately. Ensure the salt compartment is full and the water softener setting is correct. Also, check that the salt compartment lid is properly tightened to prevent leaks.
What to do if Hisense dishwasher control panel does not react?
If your Hisense dishwasher control panel isn't responding, wait a moment before trying again if you've just opened the door. Ensure the door is open, as the control panel only works when the door is open. Clean the control panel with a dry or slightly damp cloth to remove any dirt. If the control panel requires calibration, turn off the water tap, remove the plug from the wall socket, wait 60 seconds, then plug the appliance back in and turn on the water tap.
How to get rid of bad odor in Hisense HV642C60 Dishwasher?
If there's a bad odor in your Hisense dishwasher, clean around the seals and in the corners with a washing-up brush and a low-foaming cleaner. If you've been using low-temperature programs for a long time, run a high-temperature program once or twice a month or use a self-cleaning program.
Why is there detergent residue in my Hisense HV642C60?
If you find detergent residue in the detergent compartment of your Hisense dishwasher after washing, ensure the compartment is dry when you add detergent. Also, check that the dishes aren't blocking the detergent compartment from opening.
How to remove grease deposits in Hisense dishwasher?
If you notice grease deposits in your Hisense dishwasher, it's likely due to prolonged use of low-temperature programs. Select a high-temperature program like Intensive 70° for very dirty dishes, or run a self-cleaning program.
General| Product size | Full size (60 cm) |
|---|---|
| Built-in display | Yes |
| Inlet hose length | 1.5 m |
| Outlet hose length | 1.5 m |
| Number of washing programs | 6 |
| Delayed start timer | Yes |
| Delay start (max) | 24 hours |
| Width | 598 mm |
| Depth | 550 mm |
| Height | 815 mm |
| Number of place settings | 14 |
| Washing programs | Eco, Intensive |
| Drying system | Condensation |
| Weight | 25 kg |
| Appliance placement | Fully built-in |
To Next Page