Hisense KFR 2601GW/BPE - User Manual

23 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

-

KFR 2601GW/BPE

-

KFR 2601GW/BPE

INSTRUCTIONINSTRUCTION

MANUALMANUAL

-

KFR 2801GW/BPE

-

KFR 2801GW/BPE

SPLIT TYPE AIR CONDITIONERSPLIT TYPE AIR CONDITIONER

Hisense Corporation

Questions and Answers

K
Kristin BarnesJul 30, 2025
Why is my Hisense KFR 2601GW/BPE Air Conditioner not cooling or heating properly?
- T
  taraschultzJul 31, 2025
  If your Hisense Air Conditioner isn't cooling (or heating) well, it could be due to a few reasons. First, check and clean the air filter if it's dirty or clogged. Remove any heat sources in the room or reduce the number of people present. Ensure all doors and windows are closed. Also, clear any obstacles near the air intake or air discharge port to ensure good airflow. Finally, make sure the thermostat is set to a lower temperature for cooling or a higher temperature for heating.
E
Erika CarterAug 5, 2025
What to do if my Hisense Air Conditioner does not turn on?
- M
  Michael WhiteAug 5, 2025
  If your Hisense Air Conditioner isn't running, there could be several reasons. Check for a power failure and restore power if necessary. If the leakage breaker has tripped, contact a service center. If the line voltage is too low, consult your electrician or dealer. Ensure the operation button is pressed. Finally, replace the batteries in the remote control unit if they have run down.
N
Noah HolmesAug 11, 2025
Why does the compressor on my Hisense KFR 2601GW/BPE Air Conditioner start and then stop?
- J
  Joan CobbAug 12, 2025
  If the compressor in your Hisense Air Conditioner runs briefly and then stops, check for any obstructions in front of the condenser coil and remove them.
L
Lori BellAug 17, 2025
Why does my Hisense KFR 2601GW/BPE make a clicking sound?
- M
  Matthew Moore PhDAug 17, 2025
  A clicking sound from your Hisense Air Conditioner during heating or cooling operation is normal. It's caused by the expansion or contraction of plastic parts due to temperature changes and should disappear soon.
N
nathanielboydAug 23, 2025
What does it mean if the operating lamp flashes on my Hisense KFR 2601GW/BPE but it doesn't operate?
- S
  sarahharrisAug 23, 2025
  If the OPERATING lamp flashes and your Hisense Air Conditioner doesn't work, there may be an issue with the wiring system. Contact a service center.

Summary

Features

Operational Modes

Details automatic switching between cooling/heating and hot start system.

Convenience and Control

Caution Statements

Safety and Installation Precautions

Crucial warnings for safe installation and operation to prevent hazards.

Product Composition

Remote Control Overview

Components and Basic Functions

Remote Control Operations

Timer and Mode Settings

Instructions for setting timers, modes, and fan speeds.

Basic Operation Guide

Remote Control Usage and Setup

Operating the Unit

Step-by-Step Start-up

Instructions for setting mode, starting, and adjusting temperature/fan speed.

Airflow Direction Control

Fan Speed Control

Automatic Speed Adjustment

How the unit automatically selects fan speed based on conditions.

Manual Speed Selection

Airflow Direction Control

Vertical Airflow Modes

Energy Saving Features

Night Setback Functionality

How Night Setback mode saves energy during sleep.

Simultaneous Energy Saving

Using the SOFT button to limit current for energy saving.

Timer Settings

Setting the 12-Hour ON Timer

Procedure to schedule the unit to turn on within 12 hours.

Setting the 12-Hour OFF Timer

Procedure to schedule the unit to turn off within 12 hours.

Specialized Timer

1-Hour OFF Timer Usage

High Power Mode

Engaging High Power Operation

Manual Operation

Cleaning and Maintenance

Indoor Unit Cleaning Guide

Filter Management

Anti-Mold Filter Maintenance

Instructions for removing, cleaning, and replacing the anti-mold filter.

Air Clean Filter Installation

Troubleshooting Common Problems

Diagnosing and Resolving Issues

Lists common issues, their causes, and recommended solutions.

Hisense KFR 2601GW/BPE Specifications

General

Cooling Capacity	2600 W
Heating Capacity	2800 W
Net Weight (Outdoor Unit)	28 kg
Type	Split System
Operating Temperature Range (Heating)	-7°C to 24°C
Dimensions (Outdoor Unit)	700 x 544 x 245 mm

Related product manuals

Hisense KFR 2101GWE

Preview: Hisense KFR-72LW

Hisense KFR-72LW

Hisense KB50XS1A

Hisense KB70BT1A

Hisense KB25YR1AG

Hisense KB35YR1AW

Hisense KB50XS1AG

Hisense Essense

Preview: Hisense AP0819CR1W

Hisense AP0819CR1W

Preview: Hisense AP-10CR1SEPS

Hisense AP-10CR1SEPS

Hisense AMW4-36U4RAA

Preview: Hisense AUD-18UX4SGKL

Hisense AUD-18UX4SGKL