What to do if my Hisense Essense does not run?
If your Hisense Air Conditioner isn't running, there might be a few reasons: * A protector trip or blown fuse could be the issue. Wait 3 minutes and try starting it again, as the protector device might be preventing it from working. * Check if the batteries in the remote controller are exhausted. * Ensure the plug is properly plugged into the outlet.
Why is my Hisense Essense not cooling or heating the air?
If your Hisense Air Conditioner isn't cooling or heating, consider these potential causes: * Check if the air filter is dirty. * Make sure the air intakes and outlets of the air conditioner are not blocked. * Verify that the temperature is set correctly.
Why does my Hisense Essense Air Conditioner make a sound of flowing water?
The sound of flowing water in your Hisense Air Conditioner is typically caused by the flow of refrigerant. This is not a trouble. It can also be a defrosting sound in heating mode.
What to do if Hisense Air Conditioner control is ineffective?
If you're experiencing ineffective control with your Hisense Air Conditioner, it could be due to strong interference (like excessive static electricity discharge or power supply voltage abnormality). Disconnect the unit from the power supply and then reconnect it after 2-3 seconds.
Why does my Hisense Essense not operate immediately after changing modes?
If your Hisense Air Conditioner doesn't operate immediately after changing modes, a 3-minute delay is normal.
Why does my Hisense Air Conditioner have a peculiar odor?
A peculiar odor from your Hisense Air Conditioner may originate from external sources like furniture or cigarette smoke, which are drawn into the unit and expelled with the air.
Why is the compressor indicator (red) constantly lit and the indoor fan stopped on my Hisense Essense Air Conditioner?
If the compressor indicator (red) is constantly lit and the indoor fan stops on your Hisense Air Conditioner, the unit is likely shifting from heating mode to defrost. The indicator should turn off within ten minutes, and the unit will return to heating mode.
Why is a cracking sound heard from my Hisense Essense Air Conditioner?
The cracking sound you hear from your Hisense Air Conditioner may be generated by the expansion or contraction of the front panel due to temperature changes.
Why is there spray mist coming from my Hisense Essense Air Conditioner outlet?
Mist appears when the room air becomes very cold because of cool air discharged from the indoor unit during COOLING or DRY operation mode.
Essential safety guidelines and warnings for operating the appliance.
Explanation of safety symbols and critical precautions to avoid hazards.
Diagrams and labels identifying key parts of the indoor and outdoor units.
Explanation of display indicators and visual examples for different model series.
Detailed explanation of remote controller buttons and LCD indicator symbols.
Guide on inserting batteries, usage tips, and storage of the remote controller.
How to choose modes like Cooling, Dry, Fan, Heating and adjust fan speed.
Instructions for adjusting vertical and horizontal airflow direction using the remote.
Guide to setting and using SMART, Timer, SLEEP, QUIET, ECONOMY, and IFEEL modes.
Details on activating SUPER mode for fast cooling/heating and using the DIMMER function.
Procedures for cleaning the front panel and air filter.
Information on protective devices, operating conditions, and heating mode specifics.
Analysis and solutions for typical problems encountered with the unit.
Visual guide showing required distances for unit placement.
Guidelines for choosing suitable installation locations for indoor and outdoor units.
Steps for mounting the indoor unit, drilling holes, and connecting pipes.
Details on pipe insulation, connection specifications, and torque.
Guide for connecting cables and understanding wiring diagrams.
Steps for installing the outdoor unit and performing air purging.
Essential safety guidelines and warnings for operating the appliance.
Explanation of safety symbols and critical precautions to avoid hazards.
Diagrams and labels identifying key parts of the indoor and outdoor units.
Explanation of display indicators and visual examples for different model series.
Detailed explanation of remote controller buttons and LCD indicator symbols.
Guide on inserting batteries, usage tips, and storage of the remote controller.
How to choose modes like Cooling, Dry, Fan, Heating and adjust fan speed.
Instructions for adjusting vertical and horizontal airflow direction using the remote.
Guide to setting and using SMART, Timer, SLEEP, QUIET, ECONOMY, and IFEEL modes.
Details on activating SUPER mode for fast cooling/heating and using the DIMMER function.
Procedures for cleaning the front panel and air filter.
Information on protective devices, operating conditions, and heating mode specifics.
Analysis and solutions for typical problems encountered with the unit.
Visual guide showing required distances for unit placement.
Guidelines for choosing suitable installation locations for indoor and outdoor units.
Steps for mounting the indoor unit, drilling holes, and connecting pipes.
Details on pipe insulation, connection specifications, and torque.
Guide for connecting cables and understanding wiring diagrams.
Steps for installing the outdoor unit and performing air purging.
General| Type | Split System |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 16°C to 32°C |
| Operating Temperature (Heating) | -7°C to 24°C |
| Features | Auto Restart, Sleep Mode |
To Next Page