Need help?Do you have a question about the Hisense KFR-72LW and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Compressor Type | Rotary |
| Type | Split System |
| Cooling Capacity | 7200W |
Covers the technical specifications of the internal circuitry and system design.
Introduces the electrical wiring diagrams for the unit.
Detailed wiring schematic for the indoor component.
Detailed wiring schematic for the outdoor component.
Illustrates the path of refrigerant through the cooling and heating cycles.
Graphs showing system pressure under various operating conditions.
Technical drawings showing the physical dimensions of the indoor unit.
Technical drawings showing the physical dimensions of the outdoor unit.
Lists common issues indicated by LED lights during compressor operation.
Explains LED indicators for faults when the compressor is interrupted.
Details fault codes displayed by the indoor unit's indicators.
Procedure to access and display specific fault codes on the indoor unit.
Identifies and lists all components of the outdoor unit.
Identifies and lists all components of the indoor unit.
Standard resistance values for various temperature sensors at different temperatures.
Step-by-step process to diagnose and resolve evaporator freezing issues.
Diagnostic steps for evaporation overload faults.
Process for troubleshooting communication errors between units.
Steps to diagnose and fix indoor fan operational problems.
Troubleshooting guide for issues with the brightness sensor.
Steps to address EEPROM related faults.
Diagnostic process for outdoor temperature sensor malfunctions.
Troubleshooting steps for condensation temperature sensor issues.
Diagnostic process for compressor overheating conditions.
Steps to identify and resolve over-current faults.
Troubleshooting process for situations where the unit operates without load.
Steps to diagnose and fix issues related to abnormal power supply voltage.
Troubleshooting process for sudden power interruptions in the outdoor unit.
Diagnostic steps for overload conditions during cooling operation.
Steps to diagnose and resolve issues related to the IPM module.
Troubleshooting process for EEPROM related faults.
To Next Page