EasyManua.ls Logo

Hisense RB390N4BC2 - Page 43

Hisense RB390N4BC2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
9.Placethelowerdooronasmooth
surfacewithitspanelupwards.
Loosescrew andtakedownpart
andpart ,Installreplacement
doorstopper-left provided(inthe
plasticbag)andpart (stopblock)
totheleftsidewithscrew .Keep
part withtheapplianceforfuture
reference.
10.Change screwholecoverson
middlecoverplatefromlefttoright
(asshowninfigurebelow).
11. Tiptherefrigeratorbackwards,
removepart
②.
12.
13.
14.
15.
Removepart fromthelower
hingepin,looseoutthelowerhinge
pin,changeittothereversehole
site,andthentightenintoposition,
theninstall part onthelower
hingepin.
Slotthelowerdoorontothe
bottomhingepinandholdin
position. Turnthemiddlehingeby
180°,changethewasherontheaxis
tothelowerside,adjustthemiddle
hingetotheappropriatepositionand
theninstallitensuringthelower
doorinsecuredplace.
Movetheupperdoortoan
appropriateposition,andthenfix
④.
Replacetheitemsremountin
step11,changepart toleft and
thenfixthemwithscrews Install
part atlast.
,
Lower hinge part(left)
Lowerhingepart(right)
Adjustablebottomfeetpart
Adjustablebottomfeetpart
Self-tappingscrews
Adjustablebottomfeetpart
Note:washermay
sticktolowerdoor.
Washer

Table of Contents

Related product manuals