Hisense RB390N4WC1 - Water Dispenser Operation

22
FreezerDrawer
Icecubetray
WaterDispenser
Before Using
It is used to store food which needs to be
frozen, including meat, fish, ice cream,
etc.
It is used to make ice cubes. To make ice
cubes, please fill water into the ice cube
trays and the water level shall not exceed
the top line(ideally eighty percent of the
ice tray volume). Place the tray into the
freezer drawer and wait at least two hours
for the ice cubes to be formed.After the
cubes are formed, gently twist the tray to
separate the cubes and trays.
Thewaterdispenser,locatedinthe
fridgedoor,isforstoringdrinking
water.Withthisapplianceyoucan
obtainchilledwatereasilywithout
openingtherefrigerator. Youshould
beinformedoffollowingtips.
Beforeusingthisapplianceforthe
firsttime,youshoulduseitas
follows.
●
●
●
1. Takeoutthemiddlerack.
2.Holdthetwosidesofthewater
tanktightly,thenpullupthewater
tankbyshakingupanddown.
3.Unscrewthehead,thenclean it
andtheinsideofwatertank.
Beforeassembling,pleasedrainthe
waterinsidethetank,andcheck
whetherthewasherreversedornot.
1.Insert theheadintothehole.
2.Fitthetankalongtheguideson
thedoor.
3.Pressdowntwosideofthetank.
4.Whenyouhearaclicksound,that
meanstheinstallationiscompleted.
1.Be careful not to press on the head;
2.Whenfittingthewatertank,
ensuretheheadinsertedintothe
Assembling
Warning!
●
Slot
Guide