EasyManua.ls Logo

Hisense RB390N4WC1 - Page 24

Hisense RB390N4WC1
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
holefirst.
Before you fill the drinking water into
the water tank, ensure that the water
tank is steady and in a correct position.
Fillwithwaterupto3L(whichis
suggested),andnotabovethelevel.
Otherwise,itmayoverflowwhenthe
lidisclose.
1.Werecommendthatyoufillthe
waterbythefollowingway.
2.Openthesmalllidbyrotatingit,
andfillwaterfromtheinletofthe
largelid.Pleaserememberrotate
thesmalllidbacktoitsoriginal
positionwhenfinishfillingwater.
Don'ttouchotherpartsofthe
appliancewhenfillingwater,itmay
causethewaterleakage.
1.Makesurethecoverofthewater
tankisfittedon.
2.Closethefridgedoorandcheck
thedispenser.
Youshouldusethecorrectcupto
receivewaterunderneaththewater
dispenser.
Filling water
Caution!
Warning!
Dispensingwater
ReceivingWater
Warning!
Cleaning
Don'tpushthedispenserlever
forwardwithoutcup,itmaycause
thewaterleakfromthedispenser.
1.Putthewatertankoutofthedoor
carefully,andthenwashthetank,lid
andheadlightlyinwater.
Afteryouhavesuccessfully
cleanedtheappliance,youshould
dryitbynaturaldryingorusingthe
dryer.
3.Ifyouhaveusedthewater
dispenserformanytimes,thewater
inthereceivingtankmaydroponthe
floor,whichmaymakeyourfloor
wet,andyou shouldcleanthetank
withdrytowelregularlybefore
overflow.
2.

Related product manuals