19
3. Remove the three screws as follow
diagram. Lift the right upper hinge part.
4.Lift the door and place it on a padded
surface to prevent scratching.
5. Loose screw ② and screws ⑤ ,
detach part ① and part ③ part ④ .
Replace part ① to the right side and
tighten securely with screw ② . Replace
part ③ and part ④ to the left side and
tighten securely with screws ⑤ .
① Support block for door frame
② Self-tapping screw
③ Door stopper
④ Limit block
⑤ Self-tapping screw
6. Lay the refrigerator on soft foam
packaging or similar material. Remove part
To Next Page