Description of the appliance
View of the appliance
Reversing the door
1. Stand the refrigerator, open the lower
door and remove the door shelves and close
it(preventing the shelves are damaged ).
2. Use a putty knife or thin-blade
screwdriver to prize the screw hole cover
which is at the top left corner of the
refrigerator, and Unscrew the upper hinge
cover which is at the top right corner of
the refrigerator.
1. Shelves assembly
2.Temperature regu
lator
3.Storage shelf.
4.Crisper Cover
5.Crisper
6.egg tray
7.Upper shelf
8.Lower shelf
9.Adjustable feet
34
door shelves
screw hole cover
screw
upper hinge
cover (right)
9
1. 8mm socket driver
2. cross-shaped screwdriver
Before you start lay the refrigerator on it’s
back in order to gain access to the base,
you should rest it on soft foam packaging or
similar material to avoid damaging the
cooling pipes at the rear of the refrigerator.
3. Putty knife or thin-blade screwdriver
1. Stand the refrigerator, open the lower
door and remove the door shelves and close
it(preventing the shelves are damaged ).
To Next Page
Loading...
Need help?
General
