3.Unscrew the flange
screws which are used
for fixing the right upper
hinge part . Lift the upper
door and place it on a
padded surface to prevent it
from scratching.
①
②
4. Remove the upper door
and place it on a smooth
surface with its panel
upwards. Loose screws ,
detach part , then install
part to the left side with
screws
②
①
①
②.
Note: Please hold the upper
door by hand during step 3
to prevent door dropping.
Hisense Refrig erator
②right upper hinge part
①flange screws
③Upper hinge cover (right)
②screw
①Screw cover
④
Screw hole cover
2. Stand the refrigerator
upright, first remove the
screw cover and loose
the screw and unscrew
the upper hinge cover
which is at the top right
corner of the refrigerator,
and use a putty knife or
thin-blade screwdriver to
prize the screw hole cover
which is at the top left
corner of the refrigerator.
①
②
③
④
Door racks
② self-tapping screws
① Door holder
1
2
①
②
1
5. Loose screws used to fix
the middle hinge and
remove middle hinge. Then
remove the lower door.
9
To Next Page
Loading...
Need help?
General
