Operation:
1 After you press TIMER/CLOCK button when the
appliance is shut off, and timer on indicator “ON”
display on LCD, and timer hour setting blinks.
2 Press “ ” (increase) and “ ” (decrease) button to adjust
the time.
Each time “ ” button is pressed, time setting increases
by 1h.
Each time“ ” button is pressed, time setting decreases
by 1h.
It can be set from 1h to 24h, and time setting resolution is
1 hour.
3 Press “ENTER” button when reaches the desired time .
After operation, the display will be back to previous display
before timer on set, and “Timer” indicator appears on the
left corner of the screen.
You can press the “CANCEL” button at any time to cancel
the timer on setting and exit.
You can press the “TIMER/CLOCK” button to cancel the
current setting and exit.
Press “TIMER/CLOCK” button again after TIMER ON has
been set to display the rest of the time.
As shown in the figure, it indicates that the appliance will
be started after 58 minutes.
After the set time is reached, the air conditioners in the
current group/zone will be turned on under unified control.
12
1. Simple timer on function only can be set under shutoff mode.
2. After time setting of TIMER ON FUNCTION, you can set/change mode, adjust temperature
and fan speed, and set swing mode (if any).
3. After the appliance is turned on, simple timer on function will be cancelled. If you need simple
timer setting effective continuously, please set weekly timer.
4. Simple timer on/off cannot be set simultaneously.
5. Simple timer on setting is only effective for the current group/zone.
Time setting of TIMER ON FUNCTION
Display of TIMER ON mode
Rest time of TIMER ON Mode
Simple TIMER ON (invalid under weekly timer set)
ADD. FUNC.
TIMER/CLOCK
CANCEL
SWING
FAN
ENTER
ON/OFF
MODE
ZONE
1
2
Function Set
To Next Page
Loading...
Need help?
General
