Hisense YJE-C01T User Manual

部
件
介
绍
ADD. FUNC.
TIMER/CLOCK
CANCEL
SWING
FAN
ENTER
ON/OFF
MODE
ZONE
部
件
介
绍
ADD. FUNC.
TIMER/CLOCK
CANCEL
SWING
FAN
ENTER
ON/OFF
MODE
ZONE
部
件
介
绍
ADD. FUNC.
TIMER/CLOCK
CANCEL
SWING
FAN
ENTER
ON/OFF
MODE
ZONE
Default display: set temperature
If you need to display room temperature, press “ ” button and
“ENTER” button simultaneously for 3 seconds. Then the buzzer
beeps 4 times indicating setting has been changed. Then appears
on the LCD, indicating that the temperature shown on LCD is room
temperature.
If you need to cancel setting, press “ ” button and “ENTER” button
simultaneously for 3 seconds. Then disappears on the LCD,
indicating that the temperature shown on LCD is the set
temperature.
The buzzer beeps during operation by default. If you need mute
operation, hold down “FAN” button for 3 seconds, and the
buzzer beeps 4 times indicating setting has been successfully
changed.
If you need to return to defaulted setting, repeat steps above.
The backlight of the screen lights up during operation by default.
If you need to turn off the backlight, hold down “MODE” button
for 3 seconds and the buzzer beeps 4 times indicating setting
has been successfully changed.
If you need to return to defaulted setting, repeat steps above.
16
Temperature Display Setting
Buzzer Indicator Selection
Backlight Selection
Other Functions

Hisense YJE-C01T Specifications

General

Brand	Hisense
Model	YJE-C01T
Category	Controller
Language	English