Page 7 of 19
MH-020-00-Ecomaster comfort user's manual Edited 06/04
Ecomaster Comfort
1. 7. Passenger air conditioning on/off switch.
The control is activated automatically as soon as the vehicle starts.
If the motor has not been started, the passenger heating system may be activated by
pressing the passenger
(3) key. It will not be possible to activate the fan speed in this
situation the battery is not charging, to avoid it going flat.
The passenger node may be switched off manually by holding down the
(3) key for 2
seconds.
1. 8. Passenger temperature adjustment.
To change the desired temperature in the passenger area, press the keys
(15) and
(17) .
The temperature selected may vary between 17ºC (63ºF) and 27ºC (82ºF).
The upper limit for the driver temperature is HI and in that situation, the heating will
work at maximum power. The lower limit is LO and in that case the air conditioning will
work at maximum power.
To Next Page
Loading...
