Need help?Do you have a question about the Hitachi 32LD30U and is the answer not in the manual?
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LCD |
| HDMI Ports | 2 |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Speakers | 2 x 10W |
| Power Consumption | 150W |
| Resolution | 1366 x 768 pixels |
| Viewing Angle | 170° |
| Input Ports | HDMI, Component, Composite, S-Video |
Details correct power outlet usage and safe handling of the power cord to prevent hazards.
Advises against moisture, heat, flames, lightning, and damaged cords for safety.
Emphasizes using qualified personnel for servicing and specified replacement parts.
Provides instructions for recycling packaging and proper disposal of batteries and lamps.
Explains WEEE directive compliance and battery disposal requirements for EU countries.
Details the functions of each button on the remote control for operating the TV.
Specifies operating voltage and procedure for connecting the TV to the mains socket.
Instructions for connecting an aerial or cable TV plug to the rear aerial input socket.
Details connecting power and using buttons to turn the TV on or off.
Guides on switching between different input sources connected to the TV.
Guides through initial language, country, and text language selection for setup.
Explains starting automatic channel scan for digital and analogue broadcasts.
Describes how to add password protection (locks) to channels for parental control.
Details enabling AC3 Audio and special signals for hard of hearing users.
Explains favourite channel list activation and channel list modes (TV, Radio, Text, All).
Guides on using Over Air Download (OAD) for TV software updates.
Details setting up parental controls and locking specific menus or all menus.
Instructions for setting and changing the PIN number for security features.
Initiates automatic channel scanning for digital and analogue channels.
Guides through the initial setup process, including channel scanning and settings.
Sets country, language, and teletext language, then initiates automatic tuning.
Confirms automatic channel search after initial setup, including analogue channel scan.
Allows setting picture modes like Cinema, Dynamic, or Natural for viewing requirements.
Adjusts picture quality parameters: brightness, contrast, colour, sharpness, and colour temperature.
Reduces picture noise and enhances motion clarity for films.
Enables Game Mode for optimized video quality, disabling other picture settings.
Adjusts master volume and equalizer presets or custom settings.
Sets speaker balance and headphone volume levels.
Selects sound modes (Mono, Stereo) and enables Automatic Volume Limiting (AVL).
Configures Spdif Out and applies sound effects for mono broadcasts.
Controls Picture-in-Picture (PIP) and Picture-and-Picture (PAP) modes.
Starts Auto Programming System (APS) for automatic channel tuning.
Selects the country for APS tuning, with a warning about deleting stored programs.
Troubleshoots power loss and poor picture quality issues, including aerial connection.
Addresses sound issues like mute or balance problems and unresponsive remote controls.
Troubleshoots unresponsive remote controls and issues with selecting input sources.
To Next Page
