Need help?Do you have a question about the Hitachi 37LD8D20U and is the answer not in the manual?
Provides crucial safety advice for operating the television.
Lists recommended actions (DOs) and prohibited actions (DON'Ts) for safe TV operation.
Instructions on how to properly ground the TV for electrical safety.
Lists actions to avoid to prevent damage or hazards.
Details the required voltage and frequency for the TV's power supply.
Safety guidelines for handling and using the power cord.
Warns against using the TV in damp places or exposing it to water.
Instructions on how to safely clean the television screen and body.
Explains the importance of ventilation slots to prevent overheating.
Advises against placing the TV near heat sources or open flames.
Recommends disconnecting the power during storms or holidays.
Emphasizes using manufacturer-specified replacement parts for safety.
Advises referring all servicing to qualified personnel to avoid hazards.
Guidance on environmentally sound disposal of the product and its components.
Lists the key features and capabilities of the Hitachi LCD TV.
Lists the items included with the TV for installation and operation.
Identifies and labels all input and output connection ports on the TV.
Provides a key for understanding the function of each labeled port.
Explains the function of each button on the remote control.
Specifies the necessary clearance around the TV for proper ventilation.
Important steps to follow before powering on the television for the first time.
Details the power requirements and connection procedure for the TV.
Instructions for connecting the aerial cable to the TV.
Guide on how to insert batteries into the remote control.
Provides tips for proper handling and care of the remote control.
Information on the effective range and usage of the remote control.
Prompts the user to start the initial installation process upon first power-on.
Describes the automatic tuning process for digital terrestrial channels.
Asks the user if they want to search for analogue channels after digital tuning.
Explains how to use the remote control buttons to navigate menus.
How to control TV functions using the physical buttons on the set.
Adjusting the TV's volume using the remote or TV buttons.
Changing channels using programme up/down buttons.
Steps to access the TV's main menu system.
How to switch the TV to different AV input modes.
Explains how to use the remote control for TV operations.
How to cycle through channels sequentially.
Method for directly tuning to a specific channel using number buttons.
How to switch between digital and analogue TV modes.
Displays channel and program information on screen.
Accessing and using the TV guide for program schedules.
How to enable or disable subtitles for programs.
Accessing and using digital teletext features.
Automatic software updates for the IDTV.
Adjusting the picture aspect ratio for different broadcasts.
Overview of the main menu categories available in IDTV mode.
Managing channels including navigating, deleting, renaming, and locking.
How to browse through all available channels.
Procedure for removing unwanted channels from the list.
How to change the displayed name of a channel.
Setting parental controls to restrict access to certain channels.
Marking channels as favorites for easier navigation.
How to access help information for menu functions.
Accessing the installation menu for channel setup.
Options for searching and adding new channels.
Automatically scans for available digital and analogue channels.
Manually tuning for channels by entering frequency details.
Restoring factory default settings and initial channel setup.
Overview of the various settings available in the configuration menu.
Selecting the preferred audio language for broadcasts.
Configuring subtitle display and language.
Enabling or disabling navigation only through favorite channels.
Setting the preferred Electronic Programme Guide display format.
Procedures for upgrading the TV's software.
Enabling automatic software updates when the TV is in standby.
Manually initiating a software search and update.
Setting up PIN codes and menu locks for parental control.
Setting timers for automatic channel switching or recording.
Displaying and managing set timer events.
Step-by-step guide to configuring a new timer event.
Selecting the preferred language for TV menus and audio.
How to navigate to the TV Setup options.
Information on connecting Conditional Access Modules (CAM) for pay channels.
Adjusting picture settings like Mode, Contrast, Brightness, Sharpness, Colour.
Selecting preset picture modes (Cinema, Dynamic, Natural).
Fine-tuning individual picture parameters.
Adjusting the color temperature of the picture.
Reducing picture noise for a cleaner image.
Optimizing picture for movies by adjusting motion processing.
Improves color transitions and picture quality.
Adjusting the zoom level for different aspect ratios.
Restoring picture settings to factory defaults.
Adjusting volume and settings for headphone output.
Controlling the audio volume level.
Selecting audio modes like Mono, Stereo, Dual I/II.
Adjusting the left-right audio balance.
Selecting audio modes for sound output.
Automatic Volume Limiting feature.
Applying audio effects.
Enhancing bass response for audio.
Connecting and configuring an external subwoofer.
Setting up and managing the Picture-in-Picture feature.
Enabling or disabling the PIP display.
Adjusting picture settings for the PIP window.
Changing the location of the PIP window on screen.
Selecting the video source for the PIP window.
Choosing the channel to display in the PIP window.
Swapping the main picture with the PIP picture.
Setting up and managing the Picture-and-Picture feature.
Enabling or disabling the PAP display.
Adjusting picture settings for the PAP window.
Selecting the video source for the PAP window.
Choosing the channel to display in the PAP window.
Swapping the main picture with the PAP picture.
Setting a timer to automatically turn off the TV.
Locking the control panel buttons or specific channels.
Selecting the display language for menus and system messages.
Configuring the output signal for the EXT2 connector.
Setting the audio input source for the PC connection.
Enabling a blue screen for absent or weak signals.
Adjusting the transparency of the menu background.
Setting how long menus remain on screen before timing out.
Selecting the language for teletext display.
Setting a default zoom mode for picture display.
Displays a list of all tuned programs and their details.
Option to rename a selected program.
Function to insert a program into a specific slot.
Function to remove a program from the list.
Automatic channel scanning and setup process.
Setting the country for the Auto Programming System.
Selecting and tuning specific programs.
Selecting the broadcast band (C or S).
Adjusting channel selection.
Selecting the color standard (PAL, SECAM, NTSC).
Settings related to Video Cassette Recorder functionality.
Saving current settings and adjustments.
Selecting the active input source for the TV.
Connecting and setting up a PC for display.
Accessing and using menu options when in PC mode.
Sound and feature settings available in PC mode.
Adjusting picture settings specifically for PC input.
Adjusting the horizontal and vertical position of the PC image.
Automatically adjusts the PC picture position.
Manually shifting the PC image left or right.
Manually shifting the PC image up or down.
Correcting picture haziness or noise in PC mode.
Adjusting dot clock for cleaner text and graphics.
Connecting audio for PC input.
Displays current program information.
Indicates when the audio is muted.
Explains how to activate and use Picture-in-Picture and Picture-and-Picture modes.
Switching between various AV input sources.
Customizing picture settings.
Options for adjusting picture aspect ratio and zoom.
Automatic zoom adjustment based on broadcast signal.
Manually stretching picture to fill the screen.
Zooms wide pictures to fill the screen.
Zooms 16:9 aspect ratio pictures to fill the screen.
Zooms pictures with subtitles to fill the screen.
How to access and view teletext information.
Advanced teletext features like page selection and freezing.
Quick page access using colored buttons.
Special teletext mode with enhanced navigation.
Connecting HD sources like Satellite Receivers or DVD Players.
Connecting external devices using SCART cables.
Connecting devices that use an aerial input.
Connecting a decoder for unscrambled cable TV channels.
Connecting a decoder with an aerial output.
Connecting a decoder without an aerial output.
Connecting TV and VCR for optimal picture quality.
Playing back NTSC format tapes from a VCR.
Configuring sources for VCR recording.
Connecting cameras and camcorders to the TV.
Connecting devices to the TV's AV input.
Connecting devices to the TV's S-VHS input.
Connecting a decoder to a video recorder.
Using the headphone socket for audio output.
Connecting an external subwoofer for enhanced bass.
Connecting external speakers via the line out.
Guidelines for cleaning and maintaining the TV screen.
Troubleshooting steps for picture quality issues.
Diagnosing and resolving situations where no image is displayed.
Troubleshooting audio problems, such as no sound or imbalanced sound.
Troubleshooting issues with the remote control not responding.
A table showing typical PC resolutions and frequencies.
Illustrates how to connect an outdoor aerial.
Visual guides for connecting headphones, audio, video, and satellite equipment.
Shows supported AV and HDMI signals for different inputs.
Details screen size and aspect ratio.
Lists supported video standards and tuner types.
Technical details for the digital TV tuner.
Supported picture formats.
Audio system specifications.
Supported horizontal and vertical frequencies for PC input.
Lists all available input connection types.
Lists all available output connection types.
Environmental conditions for operation.
Power requirements and consumption details.
Physical dimensions and weight of the TV.
Details for PC RGB, S-input, HDMI, and SCART connector pins.
Pinout for the PC RGB input connector.
Pinout for the S-Video input connector.
Pinout for the HDMI input connector.
Pinout for the SCART input/output connectors.
Terms and conditions of the product warranty.
Step 1: Inserting batteries into the remote control.
Step 2a: Connecting the aerial directly to the TV.
Step 2b: Connecting the aerial via a VCR.
Step 2c: Connecting through a satellite decoder.
Step 2d: Connecting through a VCR and satellite decoder.
Step 3: Connecting the TV to the power outlet.
Step 4: Powering on the TV using the On/Off button.
Overview of essential remote control operations.
Step 5: Initiating the Auto Programming System for channel tuning.
To Next Page
General
