Hitachi 37LD8D20U - Features Menu (Continued); PIP ON-OFF; PIP Picture Settings; PIP Position

Engl ish -22-
Colour, Reset and S tore items in this part are identical
with “Picture” menu in the Menu System. Refer to
“Picture” menu explanations in the previous parts.
PAP Source
Select PAP Source item by using “
a
/
b
” button.
Use “
”
/
“
” button to set PAP source.
Note: When main picture source is TV, EXT-1, EXT-2,
FAV or S-VIDEO, PIP Window can only be set to
HDMI, YPBPR, PC source or vice versa.
PAP Programme
Select PAP Programme item by using “
a
/
b
” button.
PAP Programme is displayed at the bottom of menu
OSD. Use “
”/“
”
” button to set PAP Programme.
You can also use digit buttons on the remote control
to set PAP Prog r a mme.
PAP Swap
Select PAP Swap item by using “
a
/
b
” button. Use
“
”
/
“
” button. This function enables to swap be-
tween the main and the P AP picture.
Sleep Timer
By pressing
a
/
b
select “Sleep Timer”.Press _ /
`
button to set the Sleep Timer..
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
Child Lock
By pressing
a
/
b
select Child Lock.
Press
_
/
`
butto n to set the Child Lock on or off.When
on is selected, the TV can only be controlled by the
remote control handset. In this case the control panel
buttons w ill not work. Hence, if one of these buttons
is pressed, “Child Lock On” will be displayed on the
screen when the Menu screen is not visible.
* except standby button.
Language
By pressing
a
/
b
button, select Language.Use
_
/
`
button to select the language.
Available languages are: English, French, German,
Italian, Spanish, Portuguese, Dutch, Greek, Swedish,
Norwegian, Danish, Finnish, Turkish, Croatian,
Slovenian, Polish, Czech, Hungarian, Russian, Bul-
garian, Greek, Slovak.
EXT2 Out
By pressing
a
/
b
select EXT2 Output.Use
_
/
`
button, to set Ex t-2 Out to TV , DTV EXT1, FAV, YPbPr
Audio or PC Audio.
Note: When TV Source is set to HDMI, HDMI Audio
setting will be available among EXT-2 Out
options.
Note: If the currently watched source is analogue TV,
a c onnec t ed dev i ce displays analogue TV
source as well. If this source is set to digital
mode, connected devic e displays digital
source. In order to avail this function, EXT-2
Output should be set to TV/DTV.
PC Audio In
By pressing
a
/
b
select Pc Audio In.By pressing
_
/
`
button, you can change the PC Audio In to TV,,
EXT- 1, EXT-2, FAV, YPbPr Audio, PC Audio or FAV.
Blue Background
You can set the TV to automaticall y change to a blue
screen if the signal is w eak or absent, or whe n there
is no input from an external device.
The Blue Background feature can be turned on or off
by pressing
_
/
`
button .
Menu Background
By pressing
a
/
b
button, select Menu Background.
Transparency level is adjust ed by pressing
_
/
`
button.
Menu Timeout
By pressing
a
/
b
button, select Menu Timeout.
Press
_
/
`
button to change menu timeout to 15 sec,
30 sec or 60 sec.
Teletext Language
By pressing
a
/
b
button, select Teletext Language.
Press
_
/
`
button to change Teletext Language to
West, East, T ur k/Gr e,C yrillic or Ara bic.
Default Zoom
Default zoom is a feature that provides the zoom mode
of the TV set to be switched to the selected default
zoom mode (Panoramic, 4:3 ,14:9 zoom,16:9) in case
no WSS or 4:3 signal by end -user.
By pressing
a
/
b
button, select Default Zoom. Youou
can set Default Zo o m to Panoramic, 4:3, 14:9
Zoom or 16:9 by pressing
_
/
`
button .