Table 4 SVP (Windows 10 Enterprise) rear panel
Item Description
1 Management (DKC CTL1) - LAN3 port
2 Management (DKC CTL2) - LAN4 port
3 Maintenance - LAN2 port
4 Management (User) - LAN1 port
The SVP running Windows 10 operating system does not provide an option to disable
Spanning Tree Protocol (STP). If your network has BPDU enabled to prevent loops,
connect the user LAN port on controllers 1 and 2 to an Ethernet switch that is also
connected to the LAN1 port on the SVP.
Note: The SVP's default MTU size is 1500.
After the Initial Startup Wizard is complete, the SVP can be used in non-bridge mode. In
this mode, the cables can be removed from SVP ports LAN3 and LAN4 and attached to
switches. For more information, contact customer support.
SVP (Windows 10 Enterprise) rear panel
Chapter 5: Service processor
Hitachi Virtual Storage Platform G900 Hardware Reference Guide 52
To Next Page
Loading...
