EasyManua.ls Logo

Hitachi HDT725025VLA380 - Deskstar 0A33423 T7K500 250GB SATA 7200RPM 8MB Cache Hard Drive User Manual

Hitachi HDT725025VLA380 - Deskstar 0A33423 T7K500 250GB SATA 7200RPM 8MB Cache Hard Drive
291 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hard Disk Drive Specification
Deskstar T7K500
3.5 inch hard disk drive
Models:
HDT725025VLAT80
HDT725025VLA380
HDT725025VLA360
HDT725030VLAT80
HDT725030VLA380
HDT725030VLA360
HDT725032VLAT80
HDT725032VLA380
HDT725032VLA360
HDT725040VLAT80
HDT725040VLA380
HDT725040VLA360
HDT725050VLAT80
HDT725050VLA380
HDT725050VLA360
Version 1.2 06 December 2006

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Hitachi HDT725025VLA380 - Deskstar 0A33423 T7K500 250GB SATA 7200RPM 8MB Cache Hard Drive and is the answer not in the manual?

Hitachi HDT725025VLA380 - Deskstar 0A33423 T7K500 250GB SATA 7200RPM 8MB Cache Hard Drive Specifications

General IconGeneral
BrandHitachi
ModelHDT725025VLA380 - Deskstar 0A33423 T7K500 250GB SATA 7200RPM 8MB Cache Hard Drive
CategoryStorage
LanguageEnglish

Summary

General Information and Drive Features

Introduction, References, and Abbreviations

Provides an overview of the drive specification, lists relevant documents, and defines common abbreviations.

Safety Cautions

Details important safety precautions for handling the hard disk drive.

General Features of the Drive

Outlines the key features of the Deskstar T7K500 hard disk drive, including capacities and spindle speed.

Drive Characteristics and Performance

Default Drive Parameters and Data Sheet

Details default logical parameters, capacities, and data sheet specifications for various models.

Performance Metrics

Outlines key performance metrics including command overhead, mechanical positioning, and ready times.

Electrical Interface and Specifications

Electrical Interface Specification

Describes connector locations, signal definitions for PATA/SATA, and interface logic signal levels.

General Specifications

Covers jumper settings, environment, DC power requirements, reliability, and mechanical specifications.

Vibration, Shock, and Safety

Details vibration, shock resistance, acoustics, identification labels, and safety compliance.

Operation, Commands, and Timings

Registers and General Operation

Details register sets, general operation modes, reset responses, and S.M.A.R.T. functions.

Command Protocol and Descriptions

Explains command protocol, lists PIO, DMA, non-data commands, and their detailed descriptions.

Interface Timings

Provides detailed timing charts and values for various bus operations and commands.

Related product manuals