Need help?Do you have a question about the Hitachi ic35l060avv207-0 - Deskstar 60 GB Hard Drive and is the answer not in the manual?
General| Model | IC35L060AVV207-0 |
|---|---|
| Capacity | 60 GB |
| Interface | Ultra ATA/100 |
| Form Factor | 3.5 inch |
| RPM | 7200 RPM |
| Cache | 2 MB |
| Average Seek Time | 8.5 ms |
| Transfer Rate (Max) | 100 MB/s |
| Platters | 2 |
| Heads | 4 |
| Mean Time Between Failures (MTBF) | 500, 000 hours |
| Operating Temperature | 5°C to 55°C |
| Non-Operating Temperature | -40°C to 70°C |
| Height | 26.1 mm |
| Width | 101.6 mm |
| Type | Hard Drive |
| Recording Method | Perpendicular magnetic recording |
| Power Requirements | +5V, +12V |
| Standby Power Consumption | 1.0 W |
| Sleep Power Consumption | 1.0 W |
| Non-Operating Shock | 300 G |
| Depth | 147 mm |
| Non-Recoverable Read Errors | 1 per 10^14 bits read |
Details key performance metrics including seek times, transfer speeds, and latency.
Details connector types, signal definitions, and logic levels for drive interface.
Covers timing requirements for PIO, DMA, and Ultra DMA transfer modes.
Illustrates jumper pin locations, identification, assignment, and positions for configuration.
Specifies input voltage, typical current consumption, and ripple limits for the drive.
Details data integrity, start/stop cycles, power-off sequence, and data reliability.
Provides access to Attribute Values, Thresholds, and logging for drive health monitoring.
Describes security modes (Locked, Unlocked, Frozen) and password management.
Provides access to Attribute Values, Thresholds, and logging for drive health.
To Next Page