disabled. Disabling SMART disables the delivering of error log information via the SMART READ LOG
SECTOR command.
If a device receives a firmware modification, all error log data is discarded and the device error count for
the life of the device is reset to zero.
9.6.8 Self-test
The device provides the self-test features which are initiated by SMART Execute Off-line Immediate
command. The self-test checks the fault of the device, reports the test status in Device Attributes Data,
and stores the test result in the SMART self-test log sector as described in the SMART self-test log data
structure. All SMART attributes are updated accordingly during the execution of self-test.
If it is interrupted by the host during the self-tests, the device services the host command.
If the device receives a firmware modification, all self-test log data is discarded.
Deskstar 180GXP hard disk drive specifications
79
To Next Page
Loading...
Need help?
General