Hitachi AX-M910 - Playing Picture CD Disc; CD Operation

- 15 -
Clock Button
Setting the build-in clock shows the time in the display.
Sleep/Timer Button
z
In standby mode, you can use the daily timer setting to turn the unit on automatically at a
certain time everyday under standby mode. When the setting timer is on, the timer
indictor “
” will display on the VFD.
z
Use the sleep timer to turn the system off after a some time when playing. By setting the
sleep timer, you can fall asleep and know that your system will turn off by itself rather than
playing all night.
Playing picture CD disc
Press the K button on the unit to open the disc tray and place the picture CD on the disc tray (with the
printed side up). Press this button again to close the disc tray, the unit will read the disc and play it
automatically.
When menu list display or the picture displaying on the screen, you can press the
0-9 buttons to select
the desired picture and press the
ENTER button to confirm in the disc to start playing.
Note: The playback will temporarily stopped when the selected pictures have been played.
During picture playback, press the
G button to go to the next picture, and press the H button to go to
the previous picture.
Press the
S button to invert the picture, press the T button to mirror the picture, press the W button to
rotate picture in anti-clockwise direction, press the
X button to rotate picture in clockwise direction.
Press
PROGRAM button to select one of the transition effect for picture playback. (Example: Wipe Top,
Diagonal Wipe Left Top, Window H etc.)
Press the
ZOOM button repeatedly to display to picture with different scales.
Use the
STW X buttons to view the zoomed picture.
Use the
L button to enter the “Thumbnail Mode”.
(Use the
H or G buttons to display previous or next 12 pictures of disc. Press the MENU button to exit
the “Thumbnail Mode” and return to menu list. Press the
BF button to resume to normal playing.)
CD Operation
Press the K button on the unit to open the disc tray then place the CD on the disc tray (with the printed
side up). Press this button again to close the disc tray, the unit will read the disc and “CD” will be
displayed on the VFD. The disc should play automatically.
In stop mode, press the
BF button to start playing the disc, the track number and single elapsed time
will be displayed on the VFD.
When playing disc, press the
BF button to temporarily stop the playing, single elapsed time will flash
on the VFD. Press the button again, it will continue to play.
(You can also press the key “
BF” on the panel of unit.)