9
English
SPECIFICATIONS
Item Model C10RA2
Type Series commutator motor
Motor
Power source Single-phase AC 60Hz
Voltage (volts) 115
Full-load current (Amp) 15
Applicable saw blade Outside Dia. 10" (255 mm)
Hole Dia. 5/8" (15.9 mm)
No load speed 5000 rpm
Max. sawing dimension 90° Max. Height 3"
Bevel 45° Max. Height 2 – 1/2"
Net weight 64 lbs. (29 kg)
Cord 3 conductor type cable 6.6 ft. (2 m)
ACCESSORIES
WARNING:Accessories for this power tool are mentioned in this Instruction Manual.
The use of any other attachment or accessory can be dangerous and could cause injury or
mechanical damage.
STANDARD ACCESSORIES
q 10" (255 mm) TCT w Set Plate e Wrench r Hex. Wrench t Elbow
Saw Blade (1 piece) (4 pieces) (1 Piece) (1 Piece) (1 Piece)
For how to use, For how to use,
refer to page. 11 refer to page. 14
Fig. 3
To Next Page
Loading...
