– 7 –
English
Supplied
Blade Wrench
Blade Wrench
ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
Visit your Hardware Department or see the Power and Hand Tools Catalog to purchase recommended
accessories for this power tool.
TOOLS NEEDED FOR ASSEMBLY
CARTON CONTENTS
Not Supplied
Medium Screwdriver
#2 Phillips Screwdriver
Straight Edge
Adjustable Wrench
Combination Square
4 mm Hex Wrench
If any part is missing or damaged, do not attempt
to assemble the table saw, plug in the power cord,
or turn the switch ON until the missing or damaged
part is obtained and is installed correctly.
NOTE: To make assembly easier, keep contents of box
together. Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean dry cloth. This will
reduce friction when pushing the workpiece.
N Mitre gauge 1
O Push stick 1
P Rear support leg 1
Q Rear support leg hardware bag 1
R Roller wheel hardware bag 1
S Stand hardware bag 1
T Stand assembly 1
U Base cover 1
V Screw 4
W Right side table extension 1
X Auxiliary fence and hardware bag 1
Y Push block 1
UNPACKING AND CHECKING CONTENTS
Separate all parts from packing materials. Check each
part with the illustration on the next page and the “Table
of Loose Parts” to make certain all items are accounted
for, before discarding any packing material.
Table of loose parts
ITEM DESCRIPTION QUANTITY
A Table saw assembly 1
B Rear table extension 1
C
Table extension hardware bag
1
D Rear table extension tube 2
E Extension fence 1
F Extension fence locking handle 2
G Riving knife assembly 1
H Riving knife hardware bag 1
I Rip fence 1
J Rip fence hardware bag 1
K Wrench bag 1
L Dust adapter 1
M Push stick storage 1
WARNING
WARNING
To Next Page
