Hitachi C 12LDH - Standard Accessories; Optional Accessories

OPTIONAL ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
*
ALTERNATIVE PARTS --- 9 ---10 -- 05
STANDARD ACCESSORIES
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
C 12LDH
501 944-458 HEX. BAR WRENCH 4MM 1
502 985-051 BOX WRENCH 17MM 1
503 322-955 DUST BAG (BLACK) 1
601 323-546 CROWN MOLDING STOPPER (L) ASS’Y 1 INCLUD. 602-605
602 301-806 WING BOLT M6X15 1
603 CROWN MOLDING STOPPER (L) 1
604 321-390 CROWN MOLDING STOPPER HOLDER 1
605 323-682 WING BOLT M6X85 1
606 323-547 CROWN MOLDING STOPPER (R) ASS’Y 1 INCLUD. 607-610
607 323-682 WING BOLT M6X85 2
608 321-390 CROWN MOLDING STOPPER HOLDER 1
609 CROWN MOLDING STOPPER (R) 1
610 301-806 WING BOLT M6X15 1
611 323-657 HOLDER ASS’Y 1 INCLUD. 612-617
612 321-549 HOLDER 1
613 949-313 WING NUT M6 (10 PCS.) 1
614 949-556 NUT M6 (10 PCS.) 1
615 322-047 VISE PLATE 1
616 949-425 WASHER M6 (10 PCS.) 1
617 323-681 HIGH TENSION BOLT M6X105 1
618 974-561 STOPPER 1
619 949-404 WING BOLT M6X20 (10 PCS.) 1
620 323-523 GUIDE ASS’Y 1 INCLUD. 607, 611, 618, 619
621 322-957 VISE (B) ASS’Y 1 INCLUD. 622-628
622 321-551 KNOB BOLT M10X54 1
623 998-836 KNOB BOLT M6X11 1
624 SCREW HOLDER (B) 1
625 306-985 WASHER (H) 1
626 964-851 BASE RUBBER 1
627 304-043
MACHINE SCREW (W/WASHERS) M4X10 (BLACK) 1
628 318-967 VISE SHAFT 1
629 323-545 CROWN MOLDING VISE ASS’Y 1 INCLUD. 601, 621
630 323-522
TCT SAW BLADE 305MM-D25.4 HOLE-NT32 1
631 305-546
TCT SAW BLADE 305MM-D25.4 HOLE-NT60 1
632 309-418
TCT SAW BLADE 305MM-D25.4 HOLE-NT80 1
633 301-721
TCT SAW BLADE 305MM-D25.4 HOLE-NT90 1
634 310-875
TCT SAW BLADE 305MM-D25.4 HOLE-NT96 1