--- 3 ---
(4) Bevel angle fine adjustment
The Models C 12LDH and C 12FDH are easily and finely adjustable to an optional bevel angle. Pulling the
plate allows the bevel angle to be adjusted by about 48˚ to the left or about 48˚ to the right with one-touch
simple operation.
(5) Soft, vibration reducing grip
The handle grip is comfortable and slip-resistant thanks to the integrally molded rubber. In addition, it reduces
vibration transmitted to the operator's hand. The Models C 12LDH and C 12FDH are easier to operate.
(6) 130-mm high fence (Turning sub fence)
The Models C 12LDH and C 12FDH realize stable cutting thanks to the widely supportable high fence.
(7) Aggressive tool design
The tool color is gunmetallic silver to give a sturdier image. The circular saw portion is of a powerful, original
and aggressive design.
(8) Powerful 15 amps motor
The Models C 12LDH and C 12FDH are equipped with a 15-ampere motor. The Models C 12LDH and
C 12FDH can cut workpieces as quickly as the Model C 12LCH.
(9) Thumb actuated positive stops for quick and easy miter adjustment
The positive stops are provided to adjust the turn table position for miter cutting securely. These stops can be
actuated (fixed or released) with thumb quickly and easily holding the side handle.
(10) Dust guide to prevent chips from scattering
A dust guide is provided to prevent wood chips from adhering to the saw blade and scattering when cutting the
edge of the workpiece.
To Next Page
Loading...
Need help?
General
